In an effort to help me get my painting done faster and easier, I’ll be posting the steps for getting my painting on my desk and in the paint pot to my Instagram and Tumblr account.

The reason I want to share this step by one is to share the benefits of this method as well.

I’m not the only one who’s been struggling with painting, but with the painting itself.

As a new painter I’m often overwhelmed by the amount of paint I need to finish a painting.

When I first started painting I was afraid to use a paintbrush, as I feared it would scratch the paint and ruin the painting. 

I’d often use the brush to paint in the corner, or under the desk or even in the hallway.

But, it turns out that a paint brush can be used to help you paint on the surface of the paint without scratching the paint.

That is, paintbrush painting is one of those tools that are easy to use, fast, and works on all types of paint.

I’ve spent hours practicing my painting technique over the years, and I feel confident I can do it this way.

This is a great time to start getting your painting ready.

So, without further ado, here’s how to get my painted painting in the pot:Step 1: Use a paint pen, a paint knife, or a paint tool (or both) to remove the paint from the paint brush.

Step 2: Fill the paint cup with water to about 1.5 gallons, and pour the water into the paint pen. 

Step 3: Apply the paint to the surface. 

You should be able to see the paint on your workpiece.

Step 4: Once you’ve painted your piece of paper, add some marker to the paper, or put a white line on the paper to mark where the paint was applied.

Step 5: Put the paper on the workpiece and wait until you can see the paper.

If the paper looks dry, or you’re seeing the color shift, it’s probably too much paint.

If it looks wet, it probably isn’t enough paint. 

Once you’ve applied enough paint to cover the entire piece, place the piece back into the water and let it soak. 

The paint will last for up to 4 weeks. 

I like to wait at least 3 weeks between coats of paint to let the paint dry completely. 

If the paint doesn’t dry completely, then I recommend waiting until you’re done. 

However, if the paint dries completely, I suggest waiting at least 4 weeks to see if the water will return to the original color.

You may want to wait a week or two for the water to return to your work.

If you’re having trouble getting the paint into the pot, I recommend spraying some of the excess paint with water, as it will help prevent the paint coming out the top.

Here are some other great tips from me: How to use the paintpot:Step one: Use the paintbrush to paint your paper surface.

Step two: Apply a layer of paint onto the paint pad.

Step three: Add a layer or two of water to the pad, and wait.

Step four: Wait a few minutes, then use the wash cloth or brush to remove all of the water from the pad. 

(It’s not necessary to completely rinse the pad.)

Step five: Put your pad back in the water, and let the pad soak for at least four hours. 

This step is important! 

After a few hours, you should be painting your piece again. 

When you’re ready to paint, simply put the paper back into your work and let your piece dry completely before proceeding with your next step. 

Tips to get the best paint result:If you have the opportunity to do this again, you’ll be able do it quicker.

Tip: This step is best done in the afternoon, before you head to bed.

The paint can start to dry much faster after sunrise. 

 Here are a few tips to get you started:Steps 1-4: Put a layer on the paintpad and wait for it to dry completelyStep 5-8: Apply another layer of water on top of the first layerStep 9: Wait for the paint color to return. 

For this one, I would recommend waiting a few days.

Step 10: Wait another few days for the color to fully return.

Step 11: Use an old brush to fill the entire paint pad, using just the brush tip. 

Make sure to use enough paint, as you want a lot of paint on one pad.

You can apply more paint if you need to, but I usually just use the tip of the brush. 

There are two different ways you can do this:Step 12: Start by filling the entire pad with a layer (the paint) on top, using a paint sponge or paint brushStep 13: Repeat the process with